Has your Brother Printer Stop
responding and Showing an error messages E50? If it is so! Then you are just a
few steps away to resolve this issue. Like most of the other laser printers,
your Brother Printer comprises the various statuses light which indicated the
different glitches in your printer. Likewise, Error E50 notifies you the
failure of fuser unit. It is shown as “Replace fuser unit” or “failure of fuser
unit” on the front display panel of your brother printer. In this case, it is no longer in working
condition and you need to replace it.
So here Brother Printer Support Australia presents you with the complete
solution by which you can readily accomplish this task. Just go ahead and
follow the entire steps.
·
Fuser unit neither is repaired nor rebuild. You also
can’t use another manufacturer’s product to replace the fuser. So make sure the
fuser unit you are going to replace matches with your printer’s model.
·
You can find the Fuser unit at the back of your device
being held by two release lever. Turn off your printer and let the device cool.
Don’t touch it. It might hot. Pull the both of the levers downward and release
the component, before doing this, make sure the component is cool.
·
Pull out the component to release the fuser. Perform
the same steps, to replace the new fuser back.
·
Once done, your Device automatically detects the
new fuser unit and glow the light “Ready”.
Which indicates your device is now ready to accept the task.
These are the straightforward
steps our experts have explained you. But it might be complicated as this
process might vary with different model of the printer. Therefore, even after
following these steps, if you are still unable to fix this issue, then it is
better to get in touch with the experts. So feel free to contact our experts
via toll-free Brother
Printer Support Number 1800-817-695.
They will not only assist you with this particular issue but also provide you
with the best and most favorable solution in some other similar issue.
No comments:
Post a Comment